DTC B2313: Glass Position Initialization Incomplete [09/2015 - ]: Procedure

1. Turn the engine switch on (IG) and initialize the power window regulator motor (Refer to INITIALIZATION [09/2015 - ] ).
2. Turn the engine switch off.
3. Wait for at least 10 seconds, and then turn the engine switch on (IG).
4. Check for DTCs.
   RESULT:
   
   

   Result	Proceed to
   B2313 is not output	A
   B2313 output from driver side motor	B
   B2313 output from front passenger side motor	C
   B2313 output from rear motor LH	D
   B2313 output from rear motor RH	E

Result:  A

A 

END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED) 

Result:  B

B 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [09/2015 - ] )

Result:  C

C 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

(Refer to REMOVAL [09/2015 - ] )

Result:  D

D 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [09/2015 - ] )

Result:  E

E 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

(Refer to REMOVAL [09/2015 - ] )