Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch [09/2015 - ]: Procedure

1. Check for DTCs.
   RESULT:
   
   

   Result	Proceed to
   DTC is not output	A
   B2311 is output	B
   B2312 is output	C
   B2313 is output	D
   LIN communication system DTC output reoccur	E

Result:  B

B 

GO TO DTC B2311 

(Refer to DTC B2311: Power Window Motor Malfunction [09/2015 - ] )

Result:  C

C 

GO TO DTC B2312 

(Refer to DTC B2312: Power Window Switch Malfunction [09/2015 - ] )

Result:  D

D 

GO TO DTC B2313 

(Refer to DTC B2313: Glass Position Initialization Incomplete [09/2015 - ] )

Result:  E

E 

GO TO LIN COMMUNICATION SYSTEM 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2015 - ] )

Result:  A

A 

See step  2

1. Check that the manual UP/DOWN function using the multiplex network master switch can operate the driver door power window.

   OK

   Manual UP/DOWN function operates normally.

Result:  NG

NG 

OTHER PROBLEM 

(Refer to Driver Side Power Window does not Operate with Power Window Master Switch [09/2015 - ] )

Result:  OK

OK 

See step  3

1. Use the Data List to check if the master switch is functioning properly.
   MASTER SWITCH:
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   D Door P/W Auto SW	Driver side power window auto UP/DOWN switch signal / ON or OFF	ON: Driver side power window auto UP/DOWN switch on master switch operated OFF: Driver side power window switch on master switch not operated	-

   OK

   Techstream display changes normally when master switch is operated.

Result:  OK

OK 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [09/2015 - ] )

Result:  NG

NG 

REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY 

(Refer to REMOVAL [09/2015 - ] )