Jam Protection Function does not Operate [09/2015 - ]: Procedure

1. Initialize the power window regulator motor. Refer to INITIALIZATION [09/2015 - ] .
2. Check if the power window auto up/down function operates. Refer to OPERATION CHECK [09/2015 - ] .

   OK

   Auto up/down function operates.

Result: 

NG 

END (PROBLEM DUE TO INITIALIZATION FAILURE) 

Result: 

OK 

See step  2

1. Check if the jam protection function operates for applicable power window.

   HINT: 

   The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.157 in.) below that.

   OK

   Jam protection function operates.

   RESULT
   
   

   Result	Proceed to
   OK	A
   NG (Driver side power window)	B
   NG (Front passenger side power window)	C
   NG (Rear power window LH)	D
   NG (Rear power window RH)	E

Result: 

A 

END 

Result: 

B 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

Refer to REMOVAL [09/2015 - ] )

Result: 

C 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

Refer to REMOVAL [09/2015 - ] )

Result: 

D 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

Refer to REMOVAL [09/2015 - ] )

Result: 

E 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

Refer to REMOVAL [09/2015 - ] )