DTC P2610-29: ECM/PCM Engine Off Timer Performance Signal Invalid; DTC P2610-93: ECM/PCM Engine Off Timer Performance No Operation [10/2014 - ]: Procedure

1. Replace the ECM.

   Refer to REMOVAL [10/2014 - 05/2019] , or refer to REMOVAL [05/2019 - ]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Clear the DTCs.

   Powertrain > Engine > Clear DTCs 

5. Turn the engine switch off and wait for at least 30 seconds.
6. Turn the engine switch on (IG).
7. Turn the Techstream on.
8. Start the engine and wait for 10 minutes or more.
9. Enter the following menus: Powertrain / Engine / Trouble Codes / Pending.
10. If no pending DTC is output, the repair has been successfully completed.

    Powertrain > Engine > Trouble Codes 

    Result

    Proceed to
    NEXT

Result: 

NEXT 

END