DTC C1A10: Front Radar Sensor [09/2017 - 05/2019]: Procedure

1. Replace the millimeter wave radar sensor assembly.

   Refer to REMOVAL [09/2017 - 05/2019]

2. Adjust the millimeter wave radar sensor assembly.

   Refer to ADJUSTMENT [09/2017 - 05/2019]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [09/2017 - 05/2019]

   Body Electrical > Pre-Collision 2 > Clear DTCs 

2. Make sure that the DTC detection conditions are met.

   HINT: 

   If the detection conditions are not met, the system cannot detect the malfunction.

3. Check for DTCs.

   Refer to DTC CHECK / CLEAR [09/2017 - 05/2019]

   Body Electrical > Pre-Collision 2 > Trouble Codes 

   Result

   Result	Proceed to
   DTC C1A10 is not output	A
   DTC C1A10 is output	B

Result: 

A 

END (MILLIMETER WAVE RADAR SENSOR ASSEMBLY WAS DEFECTIVE) 

Result: 

B 

REPLACE DRIVING SUPPORT ECU ASSEMBLY. Refer to  REMOVAL [09/2017 - 05/2019]