LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> NX 200t Base, FWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column - Service Information >> Steering Pad Switch >> Installation [09/2017 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [09/2017 - ]: Procedure

  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 4 claws and 3 guide pins to install the steering pad switch assembly to the steering wheel sub-assembly.
    2. Install the 2 screws.
    3. Connect the steering pad switch connector to the No. 1 switch wire.
    4. Connect the steering pad switch connector to the spiral cable with sensor sub-assembly.
  2. INSTALL CRUISE CONTROL MAIN SWITCH 

    Refer to PROCEDURE - Step 1 [09/2017 - ]

  3. INSTALL STEERING PAD 

    Refer to INSTALLATION [10/2014 - 05/2019] , or refer to INSTALLATION [05/2019 - 07/2020] , or refer to INSTALLATION [07/2020 - ]

scientia non olet · About LEMON Manuals