How To Proceed With Troubleshooting [10/2014 - ]: Procedure

Result

Result: 

NEXT 

See step  2

1. Confirm problem symptoms.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 09/2017] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2017 - 05/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [05/2019 - 10/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2019 - 07/2020] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2020 - ]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Measure the auxiliary battery voltage with the power switch off.

   Standard voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  4

1. Proceed to Diagnosis System.

   Refer to DIAGNOSIS SYSTEM [10/2014 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  5

1. Proceed to DTC Check / Clear.

   Refer to DTC CHECK / CLEAR [10/2014 - ] 

   Body Electrical > Occupant Detection > Trouble Codes 

   Result

   Proceed to
   DTC is output
   DTC is not output

Result: 

DTC is not output 

GO TO PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [10/2014 - ]  

Result: 

DTC is output 

See step  6

1. Proceed to Diagnostic Trouble Code Chart.

   Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 05/2019] , or refer to DIAGNOSTIC TROUBLE CODE CHART [05/2019 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

See step  9

1. Proceed to DTC Check / Clear.

   Refer to DTC CHECK / CLEAR [10/2014 - ] 

   Body Electrical > Occupant Detection > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  10

1. Proceed to DTC Check / Clear.

   Refer to DTC CHECK / CLEAR [10/2014 - ] 

   Body Electrical > Occupant Detection > Trouble Codes 

   Result

   Proceed to
   DTC is not output
   DTC is output

Result: 

DTC is output 

GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 05/2019]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [05/2019 - ] 

Result: 

DTC is not output 

See step  11

1. Check the passenger airbag ON/OFF indicator condition.

   Result

   Result	Proceed to
   Passenger airbag ON/OFF indicator operates normally	A
   Passenger airbag ON/OFF indicator ("OFF") and SRS warning light come on	B

Result: 

B 

GO TO AIRBAG SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - ] 

Result: 

A 

See step  12

Result

Result: 

NEXT 

END