Installation [09/2014 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL 4WD ECU ASSEMBLY
- Install the 4WD ECU assembly to the blower assembly with the bolt.
Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf)
- Connect the 4WD ECU assembly connector.
- Install the 4WD ECU assembly to the blower assembly with the bolt.
- INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 20 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 20 [11/2017 - 10/2018] , or refer to PROCEDURE - Step 20 [10/2018 - 11/2019] , or refer to PROCEDURE - Step 20 [11/2019 - 10/2022] , or refer to PROCEDURE - Step 21 [10/2022 - ]
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Refer to INITIALIZATION [09/2014 - 10/2015] , or refer to INITIALIZATION [10/2015 - 11/2017] , or refer to INITIALIZATION [11/2017 - 10/2018] , or refer to INITIALIZATION [10/2018 - 09/2020] , or refer to INITIALIZATION [09/2020 - 10/2022] , or refer to INITIALIZATION [10/2022 - 10/2023] , or refer to INITIALIZATION [10/2023 - ]