Power Source Mode does not Change to ON (IG and ACC) [09/2014 - 10/2015]: Description
If any of the following operations are performed, the certification ECU (smart key ECU assembly) receives a signal, and changes the power source mode.
- With the electrical key transmitter sub-assembly in the cabin, the engine switch is pressed.
- When the transmitter battery of the electrical key transmitter sub-assembly is depleted, the brake pedal is depressed with the electrical key transmitter sub-assembly held near the engine switch.
- When the smart access system with push-button start has been canceled, the brake pedal is depressed with the electrical key transmitter sub-assembly held near the engine switch.
RELATED DATA LIST AND ACTIVE TEST ITEMS
| Problem Symptom | Data List and Active Test |
|---|---|
| Power source mode does not change to on (IG) or on (ACC) | Power Source Control
Starting Control
|