DTC C1298/98: Linear Solenoid Circuit [09/2014 - 09/2020]: Description

The 4WD ECU assembly receives signals from each sensor to control clutch fluid pressure for limiting the center differential operation, which distributes torque according to the driving conditions.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	Warning Indicate	Memory
C1298/98	Linear Solenoid Circuit	When all of the following conditions continue for 1 second or more: IG1 terminal voltage is 9.5 V or more. Operation command current for the linear solenoid (transfer control solenoid) is 3.5 A or more. Open or short in the SLC+ or SLC- circuit.	Transfer transmission wire Harness or connector Transfer control solenoid assembly 4WD ECU assembly	Comes on	DTC stored