LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> RC 350 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Navigation Receiver >> Removal [09/2014 - 11/2017] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [09/2014 - 11/2017]: Procedure

  1. PRECAUTION 

    Refer to PRECAUTION [09/2014 - 11/2017]

    NOTE:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Refer to PRECAUTION [09/2014 - 11/2017]

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [09/2014 - 10/2015] , or refer to INITIALIZATION [10/2015 - 11/2017]

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 2

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH 

    Refer to PROCEDURE - Step 3

  6. REMOVE FRONT PANEL GARNISH LH 

    Refer to PROCEDURE - Step 4

  7. REMOVE FRONT PANEL GARNISH RH 

    Refer to PROCEDURE - Step 5

  8. REMOVE CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 8

  9. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET 

    Refer to PROCEDURE - Step 7

  10. REMOVE NO. 1 RADIO BRACKET 

    Refer to PROCEDURE - Step 8

  11. REMOVE NO. 2 RADIO BRACKET 

    Refer to PROCEDURE - Step 9

  12. REMOVE RADIO RECEIVER ASSEMBLY 
scientia non olet · About LEMON Manuals