Installation [11/2017 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL ENGINE COOLANT TEMPERATURE SENSOR
HINT:
Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
Refer to INITIALIZATION [11/2017 - 10/2018] , or refer to INITIALIZATION [10/2018 - 09/2020] , or refer to INITIALIZATION [09/2020 - ]
- Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.NOTE:
If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.
- Install the engine coolant temperature sensor with the clip.NOTE:
- If the engine coolant temperature sensor has been struck or dropped, replace it.
- Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.
- Connect the engine coolant temperature sensor connector.
- Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.
- INSTALL INTAKE AIR SURGE TANK ASSEMBLY
Refer to INSTALLATION [11/2017 - ]
- PERFORM INITIALIZATION
- Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.
Refer to INITIALIZATION [11/2017 - 10/2018] , or refer to INITIALIZATION [10/2018 - 09/2020] , or refer to INITIALIZATION [09/2020 - ]
- Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.