LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> RX 350 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Front Radar Sensor System - Diagnostics - Introduction >> Front Radar Sensor System >> DTC Check / Clear [08/2019 - ] >> DTC Check / Clear [08/2019 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [08/2019 - ]

  1. CHECK FOR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Front Radar Sensor / Trouble Codes.

      Body Electrical > Front Radar Sensor > Trouble Codes 

    5. Check for DTCs (Test Failed / Pending / Confirmed).

      HINT: 

      Techstream Display Description
      Test Failed Shows the malfunction judgment results during the current trip.
      Pending Shows the malfunction judgment results up to now. (Indicates the possibility of a malfunction when no DTC is confirmed.)
      Confirmed Shows the DTCs confirmed up to now. (The number of current trips differs for each DTC.)

      Freeze frame data is stored respectively for pending DTCs, confirmed DTCs and the latest DTCs.

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Front Radar Sensor / Clear DTCs.

      Body Electrical > Front Radar Sensor > Clear DTCs 

    5. Clear the DTCs.

      HINT: 

      Clearing the DTCs will also clear the freeze frame data.

scientia non olet · About LEMON Manuals