Fail-Safe Chart [09/2015 - 12/2017]
HINT:
If any of the following conditions are detected while the cruise control system is controlling vehicle speed, the system clears the vehicle speed stored in the ECM and cancels control of vehicle speed by the cruise control system.
| Auto Cancel Condition | Warning | Fail-safe Deactivation Condition | |||
|---|---|---|---|---|---|
| Multi-information Display | Master Warning Light | Cruise Control Indicator | Warning Buzzer | ||
| Open or short in stop light switch circuit | Cruise Control Malfunction Visit Your Dealer | Illuminates | Does not illuminate | Sounds | Cruise control system is turned off and back on again using the cruise control main switch (ON/OFF button). |
|
Cruise Control Malfunction Visit Your Dealer | Illuminates | Does not illuminate | Sounds | Engine switch is turned off and back to on (IG) again. |
If the following condition occurs, the ECM cancels control of vehicle speed by the cruise control system (Stored vehicle speed is maintained):
|
- | Does not illuminate | Illuminates | - | Cruise control main switch is pushed to +RES |
| Malfunction is detected in SFI system | - | Illuminates | Does not illuminate | - | Cruise control system is turned off and back on again using the cruise control main switch (ON/OFF button). |
| Vehicle speed is less than stored vehicle speed by approximately 16 km/h (10 mph) or more | - | Does not illuminate | Illuminates | - | Cruise control main switch is pushed to -SET |
|
- | Does not illuminate | Illuminates | - | Cruise control main switch is pushed to +RES |