LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> RX 450h Base >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 2 (Lane Control System - Diagnostics (Introduction)) >> Lane Control System >> Freeze Frame Data [08/2019 - ] >> Freeze Frame Data [08/2019 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Freeze Frame Data [08/2019 - ]

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Lexus RX 450hL, 2022 Lexus RX 450h, 2021 Lexus RX 450hL, 2021 Lexus RX 450h, and 2020 Lexus RX 450hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. DESCRIPTION 
    1. Whenever a lane control system DTC is stored, the forward recognition camera stores the current vehicle state as Freeze Frame Data.
  2. CHECK FREEZE FRAME DATA 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Lane Control / Trouble Codes.

      Chassis > Lane Control > Trouble Codes 

    5. According to the display on the Techstream, select a DTC to display its freeze frame data.

      Chassis > Lane Control 

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Total Distance Traveled - - - Cannot be used
      Total Distance Traveled - Unit - - - Cannot be used
      LDA Control Lane control system control status Prohibit or Permit Prohibit: Control prohibited
      Permit: Control permitted      		 -
      Turn Switch (Right) Right turn signal switch status OFF or ON OFF: Right turn signal switch off
      ON: Right turn signal switch on      		 -
      Turn Switch (Left) Left turn signal switch status OFF or ON OFF: Left turn signal switch off
      ON: Left turn signal switch on      		 -
      Vehicle Information (2WD/4WD) - - - Cannot be used
      Vehicle Information (Conv/HV) - - - Cannot be used
scientia non olet · About LEMON Manuals