Utility [08/2019 - ]

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Lexus RX 450hL, 2022 Lexus RX 450h, 2021 Lexus RX 450hL, 2021 Lexus RX 450h, and 2020 Lexus RX 450hL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform forward recognition camera adjustment.
HINT:

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [08/2019 - ]

Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [08/2019 - ]
When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Lexus genuine part. If a non-Lexus genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket or the front camera system may not operate properly due to a difference in the transmissivity or black ceramic border.

Recognition Camera/Target Position Memory

HINT:

Recognition Camera/Target Position Memory is used to enter required information into the forward recognition camera.

Perform Recognition Camera/Target Position Memory according to the display on the Techstream.

Chassis > Front Recognition Camera > Utility

Tester Display
Recognition Camera/Target Position Memory

HINT:

For forward recognition camera adjustment procedures.

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [08/2019 - ]

Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [08/2019 - ]

Recognition Camera Axis Adjust

HINT:

Recognition Camera Axis Adjust is used to calibrate the internal data of the forward recognition camera to enhance its recognition accuracy.

Perform Recognition Camera Axis Adjust according to the display on the Techstream.

Chassis > Front Recognition Camera > Utility

Tester Display
Recognition Camera Axis Adjust

HINT:

For forward recognition camera adjustment procedures.

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [08/2019 - ]

Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [08/2019 - ]

PCS Image Information Clear

HINT:

PCS Image Information Clear is used to clear the PCS Image Information data.

Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Chassis / front recognition camera / Utility / PCS Image Information Clear.

Perform PCS Image Information Clear according to the display on the Techstream.

Chassis > Front Recognition Camera > Utility

Tester Display
PCS Image Information Clear

PCS Image Record Setting

HINT:

PCS Image Record Setting is used to activate/deactivate the PCS image recording function.

Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Chassis / front recognition camera / Utility / PCS Image Record Setting.

Perform PCS Image Record Setting according to the display on the Techstream.

Chassis > Front Recognition Camera > Utility

Tester Display
PCS Image Record Setting