DTC P0705-13: Transmission Range Sensor "A" Circuit Open; DTC P0705-62: Transmission Range Sensor "A" Signal Compare Failure [10/2017 - 09/2020]: Description
The park/neutral position switch assembly detects the shift position and sends signals to the ECM.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P0705-13 | Transmission Range Sensor "A" Circuit Open | All switches are off simultaneously for NSW, P, R, N and D for 1 minute or more (2 trip detection logic). |
|
Comes on | DTC stored | SAE Code: P0705 |
| P0705-62 | Transmission Range Sensor "A" Signal Compare Failure | Either of the following conditions A or B is met (2 trip detection logic): A. One of the following conditions (a), (b) or (c) is met for 2 seconds or more: (a) Any 2 or more of the following signals are on simultaneously:
(b) Any 2 or more of the following signals are on simultaneously:
(c) Any 2 or more of the following signals are on simultaneously:
B. Any of the following conditions is met for 2 seconds or more with the shift lever in S:
|
|
Comes on | DTC stored | SAE Code: P0705 |