LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2018 >> IS 350 Base, AWD >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering System - Diagnostics - Introduction >> Power Steering System >> DTC Check / Clear [09/2020 - ] >> DTC Check / Clear [09/2020 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [09/2020 - ]

  1. CHECK DTCs (USING TECHSTREAM) 
    1. Turn the engine switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the engine switch on (IG).
    4. Turn the Techstream on.
    5. Enter the following menus: Chassis / EMPS / Trouble Codes.

      Chassis > EMPS > Trouble Codes 

    6. Check the details of the DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2020 - 11/2021] , or refer to DIAGNOSTIC TROUBLE CODE CHART [11/2021 - ] 

  2. CLEAR DTCs (USING TECHSTREAM) 
    1. Turn the engine switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the engine switch on (IG).
    4. Turn the Techstream on.
    5. Enter the following menus: Chassis / EMPS / Trouble Codes.

      Chassis > EMPS > Clear DTCs 

    6. Clear the DTCs.

      Refer to DTC CHECK / CLEAR [09/2020 - ] 

    7. Turn the engine switch off.
    8. Disconnect the Techstream from the DLC3.
scientia non olet · About LEMON Manuals