Freeze Frame Data [10/2014 - 09/2017]
- CHECK FREEZE FRAME DATA (READ BY TECHSTREAM)
HINT:
The ECU data indicating the vehicle status is stored in the ECU as a freeze frame data simultaneously as the DTC is stored.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
Powertrain > Cruise Control > Trouble Codes
- From the DTC screen, select the DTC (snow icon displayed) to which freeze frame data is recorded.
- LIST OF FREEZE FRAME DATA
Powertrain > Cruise Control
Tester Display Measurement Item Range Normal Condition Diagnostic Note Cruise Vehicle Speed Vehicle speed Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Actual vehicle speed - Cruise Memory Vehicle Speed Stored vehicle speed Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Actual stored vehicle speed - Cruise Request Throttle Opening Angle Cruise requested position 0 to 124.99° When cruise is set (vehicle in motion at 80 km/h [50 mph]): Actual requested throttle position - Cruise Target Acceleration Target acceleration while in cruise control mode -13.1 to 13.1 m/s2 Current value displayed - Cruise Request Driving Force Cruise request torque signal -2.56 to 2.54 kN Differs according to the cruise control system condition - Cruise Request Driving Force Feedback Status Cruise request driving force feedback mode No Control/Suspend/Neg Calc Prohibited/Pos Calc Prohibited/Normal No Control: Control not operating
Suspend: Control suspended
Neg Calc Prohibited: Negative calculation prohibited
Pos Calc Prohibited: Positive calculation prohibited
Normal: Normal- Cruise Control Permission Condition Cruise control permission condition OK or NG OK: Cruise control permitted
NG: Cruise control prohibited- Cruise Control Condition Cruise control system condition No Control/Constant Speed Control Mode - Ready/ No Control: Cruise control system not operating
Constant Speed Control Mode - Ready: Constant speed control mode on standby- Accelerator Pedal Condition of the accelerator pedal during cruising ON or OFF ON: Accelerator pedal depressed
OFF: Accelerator pedal released- Cruise Brake Cancel Switch Cruise control system active condition ON or OFF ON: Cruise control activated
OFF: Cruise control deactivated- Stop Light Switch Main-CPU Stop light switch signal ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released- Stop Light Switch Sub-CPU Stop light switch signal ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released- Request Manual Cancel Whether there is a manual cancel request ON or OFF ON: Manual cancel request exists
OFF: Manual cancel request does not exist- Request Automatic Cancel Whether there is an automatic cancel request ON or OFF ON: Automatic cancel request exists
OFF: Automatic cancel request does not exist- Cruise Brake Control Decision Cruise brake control decision ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released-