Data List / Active Test [05/2019 - ]
WARNING: This page is about a different car, the 2021 Lexus NX 300h, 2020 Lexus NX 300h, and 2019 Lexus NX 300h. However, it is still accessible from the selected car via links, so may be relevant.
- DATA LIST NOTE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Front Radar Sensor / Data List.
- Read the Data List according to the display on the Techstream.
Body Electrical > Front Radar Sensor > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Total Distance Traveled - - - Cannot be used Total Distance Traveled - Unit - - - Cannot be used Vehicle Setting Value Delta X Sensor position Min.: -1.28 m, Max.: 1.27 m Actual sensor position displayed - Vehicle Setting Value Delta Z Sensor position Min.: 0.00 m, Max.: 655.35 m Actual sensor position displayed - Vehicle Setting Value H Sensor position Min.: 0.00 m, Max.: 2.55 m Actual sensor position displayed - Optical Axis Not Adjusted Status Beam axis not adjusted status Not Complete or Complete Not Complete: Beam axis adjustment not completed
Complete: Beam axis adjustment completed- Optical Axis Adjustment Angle (Horizontal) (Latest) Latest beam axis adjustment angle value (horizontal) Min.: -12.8 deg, Max.: 12.7 deg Adjusted angle of beam axis alignment (Default value: 0.0 deg.) - Optical Axis Adjustment Angle (Vertical) (Latest) Latest beam axis adjustment angle value (vertical) Min.: -12.8 deg, Max.: 12.7 deg Adjusted angle of beam axis alignment (Default value: 0.0 deg.) - Optical Axis Adjustment Angle (Horizontal) (2nd Latest) 2nd latest beam axis adjustment angle value (horizontal) Min.: -12.8 deg, Max.: 12.7 deg Adjusted angle of beam axis alignment (Default value: 0.0 deg.) - Optical Axis Adjustment Angle (Vertical) (2nd Latest) 2nd latest beam axis adjustment angle value (vertical) Min.: -12.8 deg, Max.: 12.7 deg Adjusted angle of beam axis alignment (Default value: 0.0 deg.) - Optical Axis Offset Angle (Horizontal) Beam axis offset value (horizontal) Min.: -12.8 deg, Max.: 12.7 deg Beam axis offset value - Optical Axis Offset Angle (Vertical) Beam axis offset value (vertical) Min.: -12.8 deg, Max.: 12.7 deg Beam axis offset value - Optical Axis Offset Angle (Horizontal) (with On-Line Calibration Angle) Beam axis offset value (horizontal) (after completing calibration) Min.: -12.8 deg, Max.: 12.7 deg Beam axis offset value - Optical Axis Offset Angle (Vertical) (with On-Line Calibration Angle) Beam axis offset value (vertical) (after completing calibration) Min.: -12.8 deg, Max.: 12.7 deg Beam axis offset value - Dirt Detection for Radar Cruise Dirt detection status for radar cruise OFF or ON ON: Dirt detected
OFF: Dirt not detected- Dirt Detection for PCS Dirt detection status for PCS OFF or ON ON: Dirt detected
OFF: Dirt not detected- Partially Dirt Detection Partial dirt detection status OFF or ON ON: Dirt detected
OFF: Dirt not detected- Data Flash Malfunction Data flash malfunction status OFF or ON ON: Malfunction detected
OFF: Normal- Power Supply Circuit Malfunction Power supply circuit malfunction status OFF or ON ON: Malfunction detected
OFF: Normal- Millimeter-wave Circuit Malfunction Millimeter-wave radar sensor circuit malfunction status OFF or ON ON: Malfunction detected
OFF: Normal- eDMA Transfer Completed Interrupt Malfunction - - - Cannot be used Acceleration Sensor Malfunction Acceleration sensor malfunction status OFF or ON ON: Malfunction detected
OFF: Normal- IG Voltage Protection IG voltage protection status OFF or ON ON: Malfunction detected
OFF: Normal- Optical Axis Misalignment (Vertical - Acceleration Sensor Method) Beam axis misalignment (vertical) result OFF or ON ON: Misalignment
OFF: Normal- Optical Axis Misalignment (Horizontal) Beam axis misalignment (horizontal) result OFF or ON ON: Misalignment
OFF: Normal- Optical Axis Misalignment (Vertical - Acceleration Sensor Method and Recognition Method) Beam axis misalignment (vertical) result OFF or ON ON: Misalignment
OFF: Normal- Communication Error Between Front Radar Sensor and System Control ECU Communication error status between front radar sensor and system control ECU OFF or ON ON: Malfunction
OFF: Normal- Millimeter-wave Circuit Temperature Protection Millimeter-wave circuit temperature protection status OFF or ON ON: Malfunction
OFF: Normal- Destination Malfunction Destination malfunction status OFF or ON ON: Malfunction
OFF: Normal- IG Voltage IG voltage value Min.: 0.0 V, Max.: 25.5 V 11 to 14 V: Power switch on (IG) - Front Radar Sensor Temperature Temperature of area around millimeter wave radar sensor assembly Min.: -32768°C (-58950°F), Max.: 32767°C (59013°F) Actual temperature of area around millimeter wave radar sensor displayed This value differs to the outside temperature. Vehicle Speed Vehicle speed Min.: -30.00 km/h (-19 mph), Max.: 225.99 km/h (159 mph) Almost same as actual vehicle speed - On-Line Calibration Angle (Horizontal) Calibrated angle value (horizontal) Min.: -12.8 deg, Max.: 12.7 deg Learned value - On-Line Calibration Angle (Vertical) Calibrated angle value (vertical) Min.: -12.8 deg, Max.: 12.7 deg Learned value -