LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2018 >> RC 350 Base, RWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System - Diagnostic Codes & Symptom Tests >> Power Window Control System >> Front Passenger Side Power Window Auto Up / Down Function does not Operate with Front Passenger Side Power Window Switch [09/2014 - ] >> Caution / Notice / Hint
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Caution / Notice / Hint

NOTE:
  • If the power window regulator motor assembly (for front passenger door) has been replaced with a new one, initialize the power window control system.

    Refer to INITIALIZATION [09/2014 - ]

  • Check that power window system customize setting "P Window Auto Up" is set to "Avail" before performing the following procedure.

    Refer to CUSTOMIZE PARAMETERS [09/2014 - ]

  • After the catch protection function operates, the auto up function will not operate the first time power window auto up switch is operated. The auto up function will operate normally after the first power window switch operation.

HINT: 

If the pulse sensor built into the power window regulator motor assembly (for front passenger door) is malfunctioning, the power window control system enters fail-safe mode. The remote up and down and auto up and down functions cannot be operated during fail-safe mode. However, the power window can be closed by holding the power window regulator switch assembly at the auto up position, and opened manually by pushing down the power window regulator switch assembly.

Refer to FAIL-SAFE CHART [09/2014 - ]

scientia non olet · About LEMON Manuals