Customize Parameters [11/2017 - ]

HINT: 

The following items can be customized.

1. Customizing with the Techstream
   1. Connect the Techstream to the DLC3.
   2. Turn the engine switch on (IG).
   3. Turn the Techstream on.
   4. Enter the following menus: Customize Setting / Wireless Door Lock.
   5. Select the setting by referring to the table below.

      Wireless Door Lock 

      Tester Display	Description	Default	Setting	ECU
      Wireless Control	Function that turns the wireless door lock control system on or off	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Hazard Answer Back	Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation.	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Open Door Warning	Function that sounds a buzzer when the lock switch is pressed when any of the doors are ajar.	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Unlock 2 Operation	Function that unlocks the driver door when the unlock switch on the electrical key transmitter sub-assembly is pressed once, and unlocks all of the doors when pressed twice. If this setting is OFF, pressing the unlock switch once unlocks all of the doors.	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Panic Function	Function to operate the theft deterrent system by pressing panic switch on the electrical key transmitter sub-assembly for 0.8 seconds.	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Trunk Lid Operation	Function to change the operation method of opening the luggage compartment door using the electrical key transmitter sub-assembly. 1tim ON: Push the luggage open switch once 2tim ON: Push the luggage open switch twice Long1: Push the luggage open switch for 0.8 seconds Long2: Push the luggage open switch for 1.6 seconds Prohibit: Wireless luggage compartment door open function is off	Long1	000:1tim ON, 001:2tim ON, 010:Long1, 011:Long2, 111:Prohibit	Main body ECU (Multiplex network body ECU)
      Auto Lock Time	Function that regulates the interval between unlocking and automatic relocking of the doors.	60 s	00:30 s, 01:60 s, 10:120 s	Main body ECU (Multiplex network body ECU)
      Wireless Auto Lock	Function that turns the wireless auto lock function on or off.	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Wireless Buzzer Resp	Wireless door lock buzzer response	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      P/W Wireless Ope Buzz	Wireless power window buzzer response	ON	0:OFF, 1:ON	Main body ECU (Multiplex network body ECU)
      Wireless Buzzer Vol	Wireless door lock buzzer volume	Level 5	0000:Level7, 0001:Level6, 0010:Level5, 0011:Level4, 0100:Level3, 0101:Level2, 0110:Level1, 0111:Level0	Main body ECU (Multiplex network body ECU)

2. Customizing with the Multi-display
   1. Turn the engine switch on (IG).
   2. Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door Lock Settings.
   3. Select the setting by referring to the table below.

      Display	Default	Content	Setting	Relevant ECU
      Remote 2-Press Unlock	On	Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock.	On or Off	Main body ECU (Multiplex network body ECU)
      Auto Relock Timer	60 sec.	Function that regulates the interval between unlocking and automatic relocking of the doors	OFF, 30 s, 60 s or 120 s	Main body ECU (Multiplex network body ECU)
      Lock/Unlock Feedback-Lights	On	Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation.	On or Off	Main body ECU (Multiplex network body ECU)
      Lock/Unlock Feedback-Tone	5	Wireless door lock buzzer volume	Off, 1, 2, 3, 4, 5, 6 or 7	Main body ECU (Multiplex network body ECU)