DTC Check / Clear [10/2015 - ]
- DTC CHECK
- Turn the power switch off.
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG), and wait for at least 10 seconds.
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
Body Electrical > Occupant Detection > Trouble Codes
- Check for DTCs by following the prompts on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.
- DTC CLEAR
- Turn the power switch off.
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG), and wait for at least 10 seconds.
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
Body Electrical > Occupant Detection > Clear DTCs
- Clear the DTCs by following the prompts on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.