LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> ES 350 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission System (UA80E) - Diagnostics - Introduction >> Automatic Transaxle System >> How To Proceed With Troubleshooting [06/2018 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How To Proceed With Troubleshooting [06/2018 - ]: Procedure

  1. VEHICLE BROUGHT TO WORKSHOP 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  2

  2. CUSTOMER PROBLEM ANALYSIS 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  3

  3. INSPECT BATTERY VOLTAGE 

    Standard Voltage

    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  4

  4. CONNECT TECHSTREAM TO DLC3* 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  5

  5. CHECK AND CLEAR DTCS AND FREEZE FRAME DATA* 
    1. Refer to DTC Check / Clear.

      Refer to DTC CHECK / CLEAR [06/2018 - ] 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  6

  6. VISUAL INSPECTION 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  7

  7. SELECT CHECK MODE DIAGNOSIS* 
    1. Refer to Check Mode Procedure.

      Refer to CHECK MODE PROCEDURE [06/2018 - ] 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  8

  8. PROBLEM SYMPTOM CONFIRMATION 
    1. Refer to Road Test.

      Refer to ROAD TEST [06/2018 - ] 

      Result

      Result Proceed to
      Symptom does not occur A
      Symptom occurs B

    Result: 

    B 

    See step  10

    Result: 

    A 

    See step  9

  9. SYMPTOM SIMULATION 
    1. Refer to Symptom Simulation.

      Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2018 - ]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  10

  10. DTC CHECK* 
    1. Refer to DTC Check / Clear.

      Refer to DTC CHECK / CLEAR [06/2018 - ] 

      Result

      Result Proceed to
      DTCs are not output A
      DTCs are output B

    Result: 

    B 

    See step  20

    Result: 

    A 

    See step  11

  11. BASIC INSPECTION 
    1. Refer to Park/Neutral Position Switch.

      Refer to ADJUSTMENT [06/2018 - 08/2021] , or refer to ADJUSTMENT [08/2021 - 09/2022] , or refer to ADJUSTMENT [09/2022 - ]

    2. Refer to Transmission Control Cable.

      Refer to ADJUSTMENT [06/2018 - 01/2020] , or refer to ADJUSTMENT [01/2020 - ]

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    See step  18

    Result: 

    OK 

    See step  12

  12. MECHANICAL SYSTEM TESTS 
    1. Refer to Mechanical System Tests.

      Refer to MECHANICAL SYSTEM TESTS [06/2018 - ] 

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    See step  17

    Result: 

    OK 

    See step  13

  13. HYDRAULIC TEST 
    1. Refer to Hydraulic Test.

      Refer to HYDRAULIC TEST [06/2018 - ] 

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    See step  17

    Result: 

    OK 

    See step  14

  14. MANUAL SHIFTING TEST 
    1. Refer to Manual Shifting Test.

      Refer to MANUAL SHIFTING TEST [06/2018 - ] 

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    See step  16

    Result: 

    OK 

    See step  15

  15. PROBLEM SYMPTOMS TABLE CHAPTER 1 
    1. Refer to Problem Symptoms Table.

      Refer to PROBLEM SYMPTOMS TABLE [06/2018 - ] 

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    See step  21

    Result: 

    OK 

    See step  16

  16. PROBLEM SYMPTOMS TABLE CHAPTER 2 
    1. Refer to Problem Symptoms Table.

      Refer to PROBLEM SYMPTOMS TABLE [06/2018 - ] 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  17

  17. COMPONENT INSPECTION 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  18

  18. REPAIR OR REPLACE 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  19

  19. CONFIRMATION TEST 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    END 

  20. DTC CHART 
    1. Refer to Diagnostic Trouble Code Chart.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2018 - 07/2019] , or refer to DIAGNOSTIC TROUBLE CODE CHART [07/2019 - 08/2020] , or refer to DIAGNOSTIC TROUBLE CODE CHART [08/2020 - ] 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  21

  21. CIRCUIT INSPECTION 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  22

  22. IDENTIFICATION INFORMATION 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  18

scientia non olet · About LEMON Manuals