Freeze Frame Data [10/2015 - ]

CHECK FREEZE FRAME DATA
HINT:

The ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored.
1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
5. From the DTC screen, select the DTCs (with snow icon) for which freeze frame data is recorded.

LIST OF FREEZE FRAME DATA

CRUISE CONTROL

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
Cruise Vehicle Speed	Vehicle speed	Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph)	Actual vehicle speed	-
Cruise Memory Vehicle Speed	Stored vehicle speed	Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph)	Stored vehicle speed	-
Cruise Request Throttle Opening Angle	Required throttle opening angle	Min.: 0°, Max.: 124.51°	Actual required throttle opening angle	-
Cruise Target Acceleration	Target acceleration while in cruise control mode	Min.: -13.10 m/s2, Max.: 13.10 m/s2	Current value displayed	-
Driving Support ECU Target Acceleration	Target acceleration while in cruise control mode	Min.: -13.10 m/s2, Max.: 13.10 m/s2	-	This item is displayed on the Techstream but is not used.
Cruise Request Driving Force	Cruise request drive torque	Min.: -10.00 kN, Max.: 9.92 kN	Differs according to the cruise control system condition	-
Cruise Request Driving Force Feedback Status	Cruise request driving force feedback mode	No Control, Suspend, Neg Calc Prohibited, Pos Calc Prohibited, Normal or Increasing at Start	-	This item is displayed on the Techstream but is not used.
Cruise Control Permission Condition	Cruise control system condition	NG or OK	-	This item is displayed on the Techstream but is not used.
Cruise Control Condition	Cruise control system active condition	No Control or Constant Speed Control Mode - Ready	-	This item is displayed on the Techstream but is not used.
Cruise Main Switch Operation Condition	Cruise control main switch status	ON or OFF	ON: Cruise control main switch pushed OFF: Cruise control main switch not pushed	-
Accelerator Pedal	Condition of the accelerator pedal during cruising	ON or OFF	ON: Accelerator pedal depressed OFF: Accelerator pedal released	-
Stop Light Switch Sub-CPU	Stop light switch signal	ON or OFF	-	This item is displayed on the Techstream but is not used.
Request Manual Cancel	Whether there is a manual cancel request	ON or OFF	-	This item is displayed on the Techstream but is not used.
Request Automatic Cancel	Whether there is an automatic cancel request	ON or OFF	-	This item is displayed on the Techstream but is not used.
Cruise Brake Control Decision	Cruise brake control decision	ON or OFF	ON: Cruise brake activated OFF: Cruise brake deactivated	-
Cruise Brake Control Permission Condition	Cruise brake control permission condition	OK or NG	-	This item is displayed on the Techstream but is not used.