Installation [09/2014 - 10/2015]: Procedure
WARNING: This page is about a different car, the 2015 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL CRANKSHAFT POSITION SENSOR
- Apply a coat of engine oil to an O-ring of the crankshaft position sensor.NOTE:
- When reusing the crankshaft position sensor, inspect the O-ring.
- Make sure that the O-ring is not cracked or jammed when installing the crankshaft position sensor.
- Install the crankshaft position sensor with the bolt.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
- Connect the crankshaft position sensor connector.
- Apply a coat of engine oil to an O-ring of the crankshaft position sensor.
- INSTALL COOLER COMPRESSOR ASSEMBLY
- for 2WD: (Refer to INSTALLATION [09/2014 - 10/2015] )
- for AWD: (Refer to INSTALLATION [09/2014 - 10/2015] )