LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> GS 350 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Diagnostics - Introduction >> Navigation System >> Customize Parameters [09/2014 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [09/2014 - ]: Procedure

  1. CUSTOMIZING WITH ACCESSORY METER ASSEMBLY 
    1. Turn the engine switch on (IG).
    2. Using the accessory meter assembly, select "Setup", "General", and then "Feedback Force" and change the customize setting.
      Display Default Content Setting Relevant ECU
      Feedback Force 3 (middle bar) Feedback force setting of the remote touch* 1, 2, 3, 4 or 5 Multi-media module receiver assembly
      LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5

      HINT: 

      *: The higher the set value, the stronger the remote touch feedback force becomes.

scientia non olet · About LEMON Manuals