Customize Parameters [09/2014 - ]: Procedure

CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Customizing with the Techstream

NOTE:

When using the Techstream with the engine switch off to troubleshoot:

Connect the Techstream to the DLC3 and turn a courtesy light switch on and off at 1.5-seconds intervals until communication between the Techstream and vehicle begins.

Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting / Door Lock.

Select the setting by referring to the table below.

DOOR LOCK

Display	Default	Content	Setting	Relevant ECU
Unlock Key Twice	ON	Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.	ON or OFF	Main body ECU (Multiplex network body ECU)
Auto Lock	ON	Function that locks all doors when the vehicle speed reaches a certain level.	ON or OFF	Main body ECU (Multiplex network body ECU)
Auto Lock/Shift	ON	Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed.	ON or OFF	Main body ECU (Multiplex network body ECU)
Auto Unlock/Shift	ON	Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG).	ON or OFF	Main body ECU (Multiplex network body ECU)
All Unlock/Open-Close	OFF	Function that unlocks the other doors when the driver door is opened within 10 seconds after the engine switch is turned off.	ON or OFF	Main body ECU (Multiplex network body ECU)

Customizing with the Accessory meter assembly*1 or Multi-display*2

*1: for 12.3 Inch
*2: for 8 Inch

Turn the engine switch on (IG).
Enter the following menus: SET UP/ Vehicle / Vehicle Customization / Door Lock Settings.

Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Speed Sensitive Auto Lock	On	Function that locks all doors when the vehicle speed reaches a certain level.	On or Off	Main body ECU (Multiplex network body ECU)
Shift-Linked Auto Lock	On	Function that locks all doors when the shift lever is moved out of P, with the engine switch on (IG) and all doors closed.	On or Off	Main body ECU (Multiplex network body ECU)
Shift-Linked Auto Unlock	On	Function that unlocks all doors when the shift lever is moved to P from any position other than P with the engine switch on (IG).	On or Off	Main body ECU (Multiplex network body ECU)
Driver Door-Linked Unlock	Off	Function that unlocks the other doors when the driver door is opened within 10 seconds after the engine switch is turned off.	On or Off	Main body ECU (Multiplex network body ECU)
Unlock on Second Key Turn	On	Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.	On or Off	Main body ECU (Multiplex network body ECU)