Installation [04/2013 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT SPIRAL CABLE SUB-ASSEMBLY
Refer to PROCEDURE - Step 1 [04/2013 - 06/2014] , or refer to PROCEDURE - Step 1 [06/2014 - 10/2016] , or refer to PROCEDURE - Step 1 [10/2016 - 09/2020] , or refer to PROCEDURE - Step 1 [09/2020 - ]
- INSTALL STEERING SENSOR
- Align the 2 pins and 2 guides, and engage the 6 claws to install the steering sensor to the spiral cable sub-assembly.
*a Guide *b Pin *c Lock Pin NOTE:- Do not remove the lock pin before the steering sensor is installed to the spiral cable sub-assembly.
- Do not damage the pins of the spiral cable sub-assembly and guides of the steering sensor.
- The spiral cable sub-assembly can be rotated up to 30° even when the interlock is engaged. Therefore, make sure that both guides are aligned properly when installing the steering sensor to the spiral cable sub-assembly.
- Remove the lock pin from the steering sensor.
- Align the 2 pins and 2 guides, and engage the 6 claws to install the steering sensor to the spiral cable sub-assembly.
- INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
Refer to INSTALLATION [04/2013 - 06/2014] , or refer to INSTALLATION [06/2014 - 10/2016] , or refer to INSTALLATION [10/2016 - 09/2020] , or refer to INSTALLATION [09/2020 - ]