LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> LS 500 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Power Door Lock Control System - Diagnostics - Introduction >> Power Door Lock Control System >> Operation Check [12/2017 - 10/2023] >> Operation Check [12/2017 - 10/2023]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Check [12/2017 - 10/2023]

  1. CHECK CUSTOMIZE PARAMETERS 
    NOTE:

    The operation check below is based on the non-customized initial condition of the vehicle.

    Refer to CUSTOMIZE PARAMETERS [12/2017 - 10/2022] , or refer to CUSTOMIZE PARAMETERS [10/2022 - 10/2023] 

  2. CHECK BASIC FUNCTION 
    1. Check that all doors lock when the lock side of the door control switch is pressed.
    2. Check that all doors unlock when the unlock side of the door control switch is pressed.
    3. Check that all doors lock when the door key cylinder is turned to lock using the mechanical key.
    4. Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the mechanical key and all doors unlock when it is turned to unlock again.*1
    5. Check that all doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.*2
      1. *1: Customize item "Unlock Key Twice" is set to "ON".
      2. *2: Customize item "Unlock Key Twice" is set to "OFF".
  3. CHECK KEY LOCK-IN PREVENTION FUNCTION 
    NOTE:

    In order to prevent the key from being locked in the vehicle, the following inspection should be performed with the driver door window open.

    1. Turn the engine switch on (IG) or on (ACC).
    2. With the driver door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.
    3. With the front passenger door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.
    4. With the front passenger door open, check that all doors unlock immediately after the door key cylinder is turned to lock using the mechanical key.
  4. SECURITY FUNCTION OF THE DOOR LOCK CONTROL SYSTEM 
    1. Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)
    2. Open the driver door and remove the key from the vehicle. With the door still open, lock the door using the mechanical key and close the door. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.
    3. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.
    4. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation or entry operation. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

      HINT: 

      Check that the security function of the door lock control system is canceled under the following conditions:

      • The engine is running at 550 rpm for 2 seconds or more.
      • The unlock side of the door control switch (for manual operation) is pressed when the lock position of any door is unlock.
      • The doors are unlocked by using the mechanical key.
      • The doors are unlocked by wireless operation.
      • The doors are unlocked by entry operation.
  5. SHIFT LINKED AUTOMATIC DOOR LOCK FUNCTION 

    HINT: 

    The shift linked automatic door lock function can be customized. Make sure that this function is "ON" before performing.

    1. With park (P) selected and the engine running, check that all doors lock automatically when the shift lever is moved to select another shift state.
  6. SPEED-SENSITIVE AUTOMATIC DOOR LOCK FUNCTION 

    HINT: 

    The speed-sensitive automatic door lock function can be customized. Make sure that this function is "ON" before performing.

    1. When any door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all doors lock automatically.
  7. SHIFT LINKED AUTOMATIC DOOR UNLOCK FUNCTION 

    HINT: 

    The shift linked automatic door unlock function can be customized. Make sure that this function is "ON" before performing.

    1. With a shift state other than park (P) selected and the engine running, check that all doors unlock automatically when the P position switch (shift position indicator) is pushed.
  8. DRIVER DOOR-LINKED AUTOMATIC DOOR UNLOCK FUNCTION 

    HINT: 

    The driver door-linked automatic door unlock function can be customized. Make sure that this function is "ON" before performing.

    1. When the driver door is closed, turning the engine switch from on (IG) to off and opening the driver door within approximately 45 seconds will automatically unlock all doors.
  9. KEY-LINKED 2-STEP UNLOCK FUNCTION 

    HINT: 

    The key-linked 2-step unlock function can be customized. Make sure that this function is "ON" before performing.

    1. Lock all doors.
    2. Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and all doors unlock when it is turned to unlock again.
  10. ILLUMINATED ENTRY FUNCTION 

    Refer to OPERATION CHECK [12/2017 - 10/2020] , or refer to OPERATION CHECK [10/2020 - ]

scientia non olet · About LEMON Manuals