How To Proceed With Troubleshooting [12/2017 - 10/2023]: Procedure

Result

Result: 

NEXT 

See step  2

1. Measure the battery voltage.

   Standard voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Using the Techstream, check the CAN communication function to ensure that there are no malfunctions in the communication system.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2017 - 09/2018] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2018 - 10/2020] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2020 - 10/2023]

   Result

   Proceed to
   No DTCs output
   DTCs output

Result: 

DTCs output 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2017 - 09/2018]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2018 - 10/2020]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2020 - 10/2023] 

Result: 

No DTCs output 

See step  4

1. Using the Techstream, check the LIN communication function to ensure that there are no malfunctions in the communication system.

   Result

   Proceed to
   No DTCs output
   DTCs output

Result: 

DTCs output 

GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [12/2017 - 10/2022]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 10/2023]  

Result: 

No DTCs output 

See step  5

1. Data List / Active Test

   Refer to DATA LIST / ACTIVE TEST [12/2017 - 10/2023] 

2. Terminals of ECU

   Refer to TERMINALS OF ECU [12/2017 - 10/2022] , or refer to TERMINALS OF ECU [10/2022 - 10/2023] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  6

Result

Result: 

NEXT 

END