Customize Parameters [10/2023 - ]

WARNING: This page is about a different car, the 2024 Lexus LS 500. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZE FRONT CAMERA SYSTEM

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Customizing with the GTS

Select the setting by referring to the table below.

Front Recognition Camera

Tester Display	Description	Default	Setting	ECU
PCS Collision Avoidance Assist Function	Function that enables or disables the PCS Collision Avoidance Assist Function*1	ON	$00:OFF,$01:ON	Forward recognition camera
PCS Reminder Buzzer Sound	Function that enables or disables the PCS Reminder Buzzer Sound*1	OFF	$00:OFF,$01:ON	Forward recognition camera
PCS Right Turn/Left Turn Warning Function	Function that enables or disables the PCS Right Turn/Left Turn Warning Function*2	ON	$00:OFF,$01:ON	Forward recognition camera
PCS Right Turn/Left Turn Warning Buzzer Sound	Function that enables or disables the PCS Right Turn/Left Turn Warning Buzzer Sound*2	ON	$00:OFF,$01:ON	Forward recognition camera
Mild Braking in Plus Support Mode	Function that enables or disables the Mild Braking in Plus Support Mode*2	ON	$00:OFF,$01:ON	Forward recognition camera
PCS Drive Monitor Early Warning Function	Selects ON/OFF for the PCS alarm early-output function for driver monitor*3	ON	$00:OFF,$01:ON	Forward recognition camera
FCTA Both Side Display	Selects ON/OFF for the FCTA both sides display function*1	OFF	$00:OFF,$01:ON	Forward recognition camera
2 actioned Service Command	Ready status of the driving assistant system is selected with the ignition switch ON HINT: Invalid: Any of the driving assist system is ready with the ignition switch ON Valid: The driving assist system is not ready with the ignition switch ON (the driving assist system will be set to ready after the driving assist mode select switch is operated)	Invalid	$00:Invalid,$01:Valid	Forward recognition camera
AHB/AHS Performance Adjustment	Function that selects the AHB/AHS Performance Adjustment setting*4	Normal	$00:Normal,$01:Special Performance 1	Forward recognition camera

*1: w/ Front Cross Traffic Alert
*2: Cannot be used
*3: w/ Driver Monitor Camera
*4: Make sure to check the customize setting item "AHB/AHS City Area Constant" before customize settings.
When AHB/AHS City Area Constant is Pattern 1 or 2: By setting to "Special Performance 1", operations (changes to high beam, etc.) at places with bright surroundings such as a street will increase.

When AHB/AHS City Area Constant is Pattern 3: By setting to "Special Performance 1", operations (changes to high beam, etc.) at places with bright surroundings such as a street will decrease.