Diagnosis System [10/2014 - ]
- DESCRIPTION
- Smart access system with push-button start (for Start Function) data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.
- CHECK DLC3
- Check the DLC3.
Refer to GENERAL INFORMATION [10/2014 - 05/2019] , or refer to GENERAL INFORMATION [05/2019 - ]
- Check the DLC3.
- INSPECT BATTERY VOLTAGE
- Measure the battery voltage with the engine switch off.
Standard voltage
11 to 14 V (IG OFF)
If the voltage is below 11 V, recharge or replace the battery.
- Measure the battery voltage with the engine switch off.