LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> RC 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Pre-Collision System Cancel Switch - Service Information) >> Pre-Collision System Cancel Switch >> Inspection [09/2014 - 11/2017] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [09/2014 - 11/2017]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Lexus RC 350, 2017 Lexus RC 300, 2017 Lexus RC 200t, 2016 Lexus RC 350, and 2016 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT PRE-COLLISION SYSTEM CANCEL SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY506284Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Pre-collision System Cancel Switch Assembly)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 Pressed Below 50 Ω
      1 - 2 Not pressed 1 MΩ or higher

      If the result is not as specified, replace the pre-collision system cancel switch assembly.

scientia non olet · About LEMON Manuals