Diagnosis System [09/2015 - ]

DESCRIPTION
1. Smart access system with push-button start (for Start Function) data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.
CHECK DLC3
1. Check the DLC3.
  Refer to GENERAL INFORMATION [09/2015 - ]
INSPECT BATTERY VOLTAGE
1. Measure the battery voltage.
  Standard Voltage
  
  11 to 14 V
  
  If the voltage is below 11 V, recharge or replace the battery.