DTC C1AA9: Front Camera Module Beam Axis Not Adjusted [10/2015 - 08/2019]: Description
Also if Forward Recognition Camera Learning has not been performed or did not complete normally after the forward recognition camera was replaced with a new one, DTC C1AA9 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1AA9 | Front Camera Module Beam Axis Not Adjusted | When the pre-collision system is operating, the driving support ECU assembly detects that Forward Recognition Camera Learning has not been completed for 0.3 seconds or more. |
|