Freeze Frame Data [10/2018 - ]

FREEZE FRAME DATA
1. Whenever an ASC system DTC is stored, the stereo component equalizer assembly stores the current vehicle state as freeze frame data.

CHECK FREEZE FRAME DATA

Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / ASC / Trouble Codes.
Body Electrical > ASC > Trouble Codes
According to the Techstream display, select a DTC that stored freeze frame data.

Read the freeze frame data recorded when the DTC was stored.

Body Electrical > ASC

Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
Sound State	Simulated engine sound output status	Stopping or Sounding	Stopping: Simulated engine sound stopped Sounding: Simulated engine sound being output	-
Mute	Mute setting	OFF or ON	OFF: Mute off ON: Mute on	-
Gear Position (D Range)	Gear position information	1st, 2nd, 3rd, 4th, 5th or 6th	Actual gear position	-
Suppositional Engine Speed (Target Value)	Calculated engine speed in the stereo component equalizer assembly	Min.: 0 rpm Max.: 8000 rpm	Changes according to driving conditions (accelerator pedal opening angle, vehicle speed, etc.)	-
Volume SW	-	-	-	This item is displayed on the Techstream but is not used
Speaker Disconnection Inspection	State of wire harness between stereo component equalizer assembly and No. 1 speaker assembly with box	OFF or Inspecting	OFF: Open not detected Inspecting: Open detected	-
Volume Switch Voltage	-	-	-	This item is displayed on the Techstream but is not used
Speaker 2 Disconnection Memory	-	-	-	This item is displayed on the Techstream but is not used
ASC Function	ASC function on/off status	Inactive or Active	Inactive: ASC function off Active: ASC function on	-
ASC Switch	Vehicle sound switch on/off status	OFF or ON	OFF: Vehicle sound switch off ON: Vehicle sound switch on	-
Pseudo Engine Revolution (HV ECU)	Actual engine speed	Min.: 0 rpm Max.: 12800 rpm	Actual engine speed	for HV Model
Vehicle Speed	Maximum wheel speed sensor reading	Min.: 0 km/h Max.: 327.67 km/h	Actual vehicle speed	-
Accelerator Position	Accelerator pedal opening angle	Min.: 0% Max.: 111.0%	Actual accelerator pedal opening angle	-
Shift SW Status (P Range)	Park/Neutral position switch status	OFF or ON	OFF: Shift lever in any position other than P ON: Shift lever in P	-
Shift SW Status (R Range)	Shift lever position (R)	OFF or ON	OFF: Shift lever in any position other than R ON: Shift lever in R	-
Shift SW Status (D Range)	Shift lever position (D)	OFF or ON	OFF: Shift lever in any position other than D ON: Shift lever in D	-
Shift SW Status (N Range)	Shift lever position (N)	OFF or ON	OFF: Shift lever in any position other than N ON: Shift lever in N	-
Gear Position (Sports Mode)	Gear position information with shift lever in S	Not Sports Mode, 1st, 2nd, 3rd, 4th, 5th or 6th	Not Sports Mode: Shift lever in any position other than S 1st: S1 gear range selected 2nd: S2 gear range selected 3rd: S3 gear range selected 4th: S4 gear range selected 5th: S5 gear range selected 6th: S6 gear range selected	-
Current Gear Position (D Range)	Current gear position information	1st, 2nd, 3rd, 4th, 5th or 6th	Current gear position displayed (1st, 2nd, 3rd, 4th, 5th or 6th)	-
Drive Mode Status	Drive mode status	Normal, Power, Sport, Sport+, Comfort, ECO, Customize	Actual drive mode displayed	-
Integrated Sport Mode Indicator	Drive mode (SPORT) status	OFF or Lighting	OFF: Drive mode other than SPORT mode selected Lighting: SPORT mode selected	This item is displayed on the Techstream but is not used
Sport Mode Indicator	S position switch status	OFF or Lighting	OFF: Shift lever in any position other than S Lighting: Shift lever in S	This item is displayed on the Techstream but is not used
SNOW Mode Indicator	SNOW mode indicator illumination status	OFF or Lighting	OFF: SNOW mode indicator not illuminated Lighting: SNOW mode indicator illuminated	This item is displayed on the Techstream but is not used
ECO Mode Indicator	ECO mode indicator illumination status	OFF or Lighting	OFF: ECO mode indicator not illuminated Lighting: ECO mode indicator illuminates	This item is displayed on the Techstream but is not used
Powertrain Customize Status	Powertrain customize status	NONE, POWER, ECO, NORMAL	Actual powertrain displayed	-
Mode Indicator Signal	Drive mode indicator illumination status	OFF, S Mode, M Mode, D Mode	Actual mode indicator status displayed	-
Engine Mode	Engine operating status	Stopped, Move to Stopping, Starting or Running	Stopped: Engine stopped Move to Stopping: Engine attempting to stop Starting: Engine attempting to start Running: Engine running	for HV Model
EV Mode	EV mode indicator illumination status	OFF or Lighting	OFF: EV mode indicator not illuminated Lighting: EV mode indicator illuminated	for HV Model
Integrated Sport Mode Status	Drive mode (SPORT, SPORT S or SPORT S+) status	Not Sport, PWR & Chassis, Chassis or PWR	Not Sport: Drive mode other than SPORT, SPORT S or SPORT S+ mode selected PWR & Chassis: SPORT S+ mode selected Chassis: SPORT S mode selected PWR: SPORT S mode selected	This item is displayed on the Techstream but is not used
Engine Revolution	Actual engine speed	Min.: 0 rpm Max.: 10000 rpm	Actual engine speed	-
Gear Shifting Signal	Shifting status	OFF or ON	OFF: Gear not being changed ON: Gear being changed	for Gasoline Model
Number of DTC	Number of trouble codes	Min.: 0 Max.: 255	Number of DTCs displayed	-

CLEAR FREEZE FRAME DATA
NOTE:
Clearing the DTCs will also clear the freeze frame data.
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Clear DTCs and freeze frame data.
  Refer to DTC CHECK / CLEAR [10/2018 - ]
  
  Body Electrical > ASC > Clear DTCs