LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2019 >> UX 200 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) System (K120) (Diagnostics - Introduction) >> Continuously Variable Transaxle System >> Registration [10/2018 - 07/2022] >> Caution / Notice / Hint
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Caution / Notice / Hint

NOTE:
  • When the continuously variable transaxle assembly is replaced, the transaxle compensation code must be registered to the TCM (Procedure 1).

    After the continuously variable transaxle assembly is installed, the Quick Response (QR) code label will be positioned where the code cannot be read. Therefore, before installing the continuously variable transaxle assembly, record the transaxle compensation code or register it using the Techstream.

  • When the TCM is replaced, the existing transaxle compensation code must be registered to the new TCM (Procedure 2).
  • Perform Reset Memory after replacing the continuously variable transaxle parts.

    Refer to INITIALIZATION [10/2018 - 07/2022] 

scientia non olet · About LEMON Manuals