Customize Parameters [10/2018 - 07/2022]
- CUSTOMIZE LTA NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Customizing with the Multi-information Display
- Turn the ignition switch to ON.
- Enter the following menus: Settings Tab / Settings / LTA Setup
- Select the setting by referring to the table below.
- Using the steering pad switches, change the customize settings.LTA
Display Description Setting Default Lane Center Lane centering function setting On/Off On Steering Assist Steering assist function setting On/Off On Alert Method of lane departure alert Steering vibrator/Buzzer Steering vibrator Sensitivity Lane departure alert timing High/Standard High Sway Warning Vehicle sway warning function setting On/Off On Sway Sensitivity Sway warning sensitivity setting High/Standard/Low Standard HINT:
Some LTA functions are operable only when other functions are enabled or operating. Refer to the following table.
Vehicle-to-vehicle Distance Control (With Full-speed Range Following Function) LTA Main Switch Steering Assist Lane Center Sway Warning Lane Departure Alert Function - ◦ - - - Steering Assist Function - ◦ ◦ - - Lane Centering Function • ◦ ◦ ◦ - Vehicle Sway Warning Function - - - - ◦ •: System/function operating
◦: Turned/Set to On