LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2020 >> ES 350 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Transfer Case System - Service Information) >> Transfer Assembly >> Components [08/2020 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Components [08/2020 - ]

WARNING: This page is about a different car, the 2024 Lexus ES 250, 2023 Lexus ES 250, 2022 Lexus ES 250, and 2021 Lexus ES 250. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transfer Assembly Replacement Components With Torque Specifications (1 Of 3)
GTY958490Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
*1 PROPELLER SHAFT HEAT INSULATOR *2 NO. 1 PROPELLER SHAFT HEAT INSULATOR BRACKET SUB-ASSEMBLY
*3 REAR ENGINE MOUNTING BRACKET SUB-ASSEMBLY *4 TRANSFER ASSEMBLY
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N.m (kgf/cm, ft.lbf) N.m (kgf/cm, ft.lbf): Specified torque
* For use with SST and a union nut wrench - -
Fig 2: Transfer Assembly Replacement Components With Torque Specifications (2 Of 3)
GTY934828Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
*1 NO. 1 TRANSFER CASE COVER *2 NO. 1 TRANSFER CASE PLUG
*3 RING GEAR MOUNTING CASE BEARING LH *4 RING GEAR MOUNTING CASE BEARING RH
*5 SHAFT SNAP RING *6 TRANSFER CASE OIL SEAL RH
*7 TRANSFER RING GEAR *8 TRANSFER RING GEAR MOUNTING CASE
*9 GASKET *10 NO. 2 TRANSFER RING GEAR MOUNTING CASE WASHER
*11 NO. 1 RING GEAR MOUNTING CASE WASHER *12 TRANSFER CASE
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N.m (kgf/cm, ft.lbf) Non-reusable part
MP grease - -
Fig 3: Transfer Assembly Replacement Components With Torque Specifications (3 Of 3)
GTY955603Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
*1 BREATHER OIL DEFLECTOR *2 FRONT TRANSFER DRIVEN PINION BEARING
*3 REAR TRANSFER OUTPUT SHAFT DUST DEFLECTOR *4 REAR TRANSFER OUTPUT SHAFT SUB-ASSEMBLY
*5 TRANSFER AND TRANSAXLE SETTING STUD BOLT *6 TRANSFER CASE BREATHER PLUG
*7 TRANSFER CASE OIL SEAL *8 TRANSFER CASE STRAIGHT PIN
*9 TRANSFER DRAIN PLUG *10 TRANSFER DRIVEN PINION
*11 TRANSFER FILLER PLUG *12 TRANSFER OUTPUT SHAFT WASHER
*13 TRANSFER GEAR NUT *14 O-RING
*15 TRANSFER CASE *16 GASKET
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N.m (kgf/cm, ft.lbf) N.m (kgf/cm, ft.lbf): Specified torque
Non-reusable part MP grease
* Precoated part - -