Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch [08/2015 - ]: Procedure
- CHECK FOR DTC
- Clear the DTCs (Refer to DTC CHECK / CLEAR [08/2015 - ] ).
- Check for DTCs (Refer to DTC CHECK / CLEAR [08/2015 - ]
).RESULT
Result Proceed to DTC is not output A DTC B2311 is output B DTC B2312 is output C DTC B2313 is output D LIN communication system DTCs are output E
Result:
B
GO TO DTC B2311
(Refer to DTC B2311: Power Window Motor Malfunction [08/2015 - ] )
Result:
C
GO TO DTC B2312
(Refer to DTC B2312: Power Window Switch Malfunction [08/2015 - ] )
Result:
D
GO TO DTC B2313
(Refer to DTC B2313: Glass Position Initialization Incomplete [08/2015 - ] )
Result:
E
GO TO LIN COMMUNICATION SYSTEM
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ] )
Result:
A
See step 2
- CHECK MANUAL UP/DOWN FUNCTION
- Check that the front power window moves when the manual up/down function of the multiplex network master switch is operated (Refer to OPERATION CHECK [08/2015 - 08/2016]
, or refer to OPERATION CHECK [08/2016 - ]
).
OK
Front power window moves.
Result:
NG
GO TO "Driver Side Power Window does not Operate with Power Window Master Switch"
(Refer to Driver Side Power Window does not Operate with Power Window Master Switch [08/2015 - 08/2019] , or refer to Driver Side Power Window does not Operate with Power Window Master Switch [08/2019 - ] )
Result:
OK
See step 3
- Check that the front power window moves when the manual up/down function of the multiplex network master switch is operated (Refer to OPERATION CHECK [08/2015 - 08/2016]
, or refer to OPERATION CHECK [08/2016 - ]
).
- READ VALUE USING TECHSTREAM (MULTIPLEX NETWORK MASTER SWITCH)
- Use the Data List to check if the multiplex network master switch is functioning properly (Refer to DATA LIST / ACTIVE TEST [08/2015 - ]
).MASTER SWITCH
Tester Display Measurement Item/Range Normal Condition Diagnostic Note D Door P/W Auto SW Driver side power window auto up/down signal / ON or OFF ON: Driver side power window auto up/down switch on power window regulator master switch operated
OFF: Driver side power window auto up/down switch on power window regulator master switch not operated- OK
On tester screen, item changes between ON and OFF according to above chart.
Result:
OK
REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
(Refer to REMOVAL [08/2015 - ] )
Result:
NG
REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY
(Refer to REMOVAL [08/2015 - 08/2019] , or refer to REMOVAL [08/2019 - ] )
- Use the Data List to check if the multiplex network master switch is functioning properly (Refer to DATA LIST / ACTIVE TEST [08/2015 - ]
).