Customize Parameters [04/2013 - ]
- CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Smart Key or Seat / Access or Seat.
- Select the setting by referring to the table below.
Smart Key / Access
Tester Display Description Default Setting ECU Seat position/Tilt & Telesco memory recall setting This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system". D Door 0:D Door, 1:Any Door Main body ECU (Multiplex network body ECU) Seat
Tester Display Description Default Setting ECU Seat Move Distance Allows customizing of the seat movement distance for the power easy access system. Standard 00:OFF, 01:Little, 10:Standard Main body ECU (Multiplex network body ECU)
- Customizing with the multi-display
- Turn the engine switch on (IG).
- Enter the following menus: MENU / Setup / Vehicle / Vehicle Settings / Vehicle Customization / Other Vehicle Settings.
- Select the setting by referring to the table below.
Display Description Default Setting Relevant ECU Driver's seat easy exit Allows customizing of the seat movement distance for the power easy access system. Full Off / Partial / Full Main body ECU (Multiplex network body ECU)