Reassembly [10/2016 - 09/2020]: Procedure
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2024 Lexus IS 500, 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 500, and 2023 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL FRONT ESCUTCHEON (for 7 Inch Display)
- Engage the 3 claws and 2 guides as shown in the illustration.
- Engage the 5 guides and 10 claws as shown in the illustration.
- Check that there is no clearance between the front escutcheon and rear escutcheon as shown in the illustration.
Standard Measurement
Area Measurement A 0 mm (0 in.) B 0 mm (0 in.) - Install the front escutcheon and rear escutcheon with the 6 screws.
- Remove the release paper from a new insulator.
HINT:
After removing the release paper, keep the exposed adhesive free from foreign matter.
- Install the insulator as shown in the illustration.
Standard Measurement
Area Measurement A 0 to 2.0 mm (0 to 0.0787 in.) B 0 to 10.0 mm (0 to 0.394 in.)
- Engage the 3 claws and 2 guides as shown in the illustration.
- INSTALL FRONT ESCUTCHEON (for 10.3 Inch Display)
- Engage the 3 claws and 3 guides as shown in the illustration.
- Engage the 6 guides and 8 claws as shown in the illustration.
- Check that there is no clearance between the front escutcheon and rear escutcheon as shown in the illustration.
Standard Measurement
Area Measurement A 0 mm (0 in.) B 0 mm (0 in.) - Install the front escutcheon and rear escutcheon with the 5 screws.
- Remove the release paper from a new insulator.
HINT:
After removing the release paper, keep the exposed adhesive free from foreign matter.
- Install the insulator as shown in the illustration.
*a Line HINT:
Install the insulator along the line on the front escutcheon.
- Engage the 3 claws and 3 guides as shown in the illustration.