Caution / Notice / Hint

NOTE:

The easy access buckle system uses the CAN communication system. First, confirm that there are no malfunction in the CAN communication system. Refer to How to Proceed with Troubleshooting.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2023 - ]
If DTC B264F is output, repair according to the procedure for B264F first.
Refer to DTC B264F: Easy Access Buckle Sensor Malfunction [10/2023 - ]
If DTC B264F-96 is output, repair according to the procedure for B264F-96 first.
Refer to DTC B264F-96: Easy Access Buckle Sensor (Motor) Component Internal Failure [10/2023 - ]
Perform the initialization procedure and stored memory will be reset.
Before inspecting parts for malfunctions, inspect the fuses of related systems.
Make sure that customize function is ON.
Refer to CUSTOMIZE PARAMETERS [10/2023 - ]

HINT:

After replacing the position control ECU assembly, seat assembly, front seat inner belt assembly and parts (including removal and installation), initialize the position control ECU assembly.

Refer to REGISTRATION [10/2023 - ]