LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2020 >> LS 500h RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (ETHERNET Communication System - Diagnostics - Introduction) >> ETHERNET Communication System >> Data List / Active Test [11/2021 - ] >> Data List / Active Test [11/2021 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List / Active Test [11/2021 - ]

WARNING: This page is about a different car, the 2024 Lexus LS 500h, 2023 Lexus LS 500h, and 2022 Lexus LS 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. DATA LIST 
    1. Ethernet switching hub ECU assembly
      1. Read the Data List.

        Body Electrical > Ethernet Switch1 > Data List 

        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Port 1 Available Display available of the port 1 Yes (Port 1) / No Yes (Port 1) -
        Port 1 Link Information Display the link information of the port 1 Link Down / Link Up Link Up -
        Port 2 Available Display available of the port 2 Yes (Port 2) / No Yes (Port 2) -
        Port 2 Link Information Display the link information of the port 2 Link Down / Link Up Link Up -
        Port 3 Available Display available of the port 3 Yes (Port 3) / No Yes (Port 3) -
        Port 3 Link Information Display the link information of the port 3 Link Down / Link Up Link Up -
        Port 4 Available Display available of the port 4 Yes (Port 4) / No Yes (Port 4) -
        Port 4 Link Information Display the link information of the port 4 Link Down / Link Up Link Up -
        Port 5 Available Display available of the port 5 Yes (Port 5) / No Yes (Port 5) -
        Port 5 Link Information Display the link information of the port 5 Link Down / Link Up Link Up -
        Port 6 Available Display available of the port 6 Yes (Port 6) / No Yes (Port 6) -
        Port 6 Link Information Display the link information of the port 6 Link Down / Link Up Link Up -
        NOTE:

        If the inner housing is connected in the incorrect connection position, the link information indicates Link Down momentarily in cycles of approximately 8 seconds.

    2. No. 2 ethernet switching hub ECU assembly
      1. Read the Data List.

        Body Electrical > Ethernet Switch2 > Data List 

        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Port 1 Available Display available of the port 1 Yes (Port 1) / No Yes (Port 1) -
        Port 1 Link Information Display the link information of the port 1 Link Down / Link Up Link Up -
        Port 2 Available Display available of the port 2 Yes (Port 2) / No Yes (Port 2) -
        Port 2 Link Information Display the link information of the port 2 Link Down / Link Up Link Up -
        Port 3 Available Display available of the port 3 Yes (Port 3) / No Yes (Port 3) -
        Port 3 Link Information Display the link information of the port 3 Link Down / Link Up Link Up -
        Port 4 Available Display available of the port 4 Yes (Port 4) / No Yes (Port 4) -
        Port 4 Link Information Display the link information of the port 4 Link Down / Link Up Link Up -
        Port 5 Available Display available of the port 5 Yes (Port 5) / No Yes (Port 5) -
        Port 5 Link Information Display the link information of the port 5 Link Down / Link Up Link Up -
        Port 6 Available Display available of the port 6 Yes (Port 6) / No Yes (Port 6) -
        Port 6 Link Information Display the link information of the port 6 Link Down / Link Up Link Up -
        NOTE:

        If the inner housing is connected in the incorrect connection position, the link information indicates Link Down momentarily in cycles of approximately 8 seconds.