Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch [09/2015 - ]: Procedure

1. Check for DTCs. Refer to DTC CHECK / CLEAR [09/2015 - ] .
   RESULT
   
   

   Result	Proceed to
   DTC is not output	A
   B2311 is output	B
   B2312 is output	C
   B2313 is output	D
   LIN communication system DTCs are output	E

Result: 

B 

GO TO DTC B2311 

Refer to DTC B2311: Power Window Motor Malfunction [09/2015 - ] )

Result: 

C 

GO TO DTC B2312 

Refer to DTC B2312: Power Window Switch Malfunction [09/2015 - ] )

Result: 

D 

GO TO DTC B2313 

Refer to DTC B2313: Glass Position Initialization Incomplete [09/2015 - ] )

Result: 

E 

GO TO LIN COMMUNICATION SYSTEM 

Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2015 - ] )

Result: 

A 

See step  2

1. Check that the driver side door power window moves when the manual up/down function of the multiplex network master switch is operated. Refer to OPERATION CHECK [09/2015 - ] .

   OK

   Driver side door power window moves.

Result: 

NG 

OTHER PROBLEM (GO TO PROBLEM SYMPTOMS TABLE) 

Refer to Driver Side Power Window does not Operate with Power Window Master Switch [09/2015 - ] )

Result: 

OK 

See step  3

1. Use the Data List to check if the master switch is functioning properly. Refer to DATA LIST / ACTIVE TEST [09/2015 - ] .
   MASTER SWITCH
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   D Door P/W Auto SW	Driver side power window auto up/down signal / ON or OFF	ON: Driver side power window auto up/down switch operated OFF: Driver side power window switch not operated	-

   OK

   Techstream display changes according to operation of multiplex network master switch.

Result: 

OK 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

Refer to REMOVAL [09/2015 - ] )

Result: 

NG 

REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY 

Refer to REMOVAL [09/2015 - ] )