April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [05/2019 - ]

WARNING: This page is about a different variant/trim than selected.

CHECK DTC
1. Check the DTCs.
  1. Connect the Techstream to the DLC3.
  2. Turn the engine switch on (IG).
  3. Turn the Techstream on.
  4. Read the DTCs following the prompts on the Techstream screen. Enter the following menus: Chassis / Four Wheel Drive / Trouble Codes.
    Chassis > Four Wheel Drive > Trouble Codes
  5. Check the details of the DTCs.
    Refer to DIAGNOSTIC TROUBLE CODE CHART [05/2019 - ]
CLEAR DTC
1. Clear the DTCs.
  1. Connect the Techstream to the DLC3.
  2. Turn the engine switch on (IG).
  3. Turn the Techstream on.
  4. Operate the Techstream to clear the DTCs. Enter the following menus: Chassis / Four Wheel Drive / Trouble Codes.
    Chassis > Four Wheel Drive > Clear DTCs
  5. According to the display on the Techstream, select the trouble code data display with the clear button.