Typical Enabling Conditions

P0712: Range check 

1. The monitor will run whenever these DTCs are not present	None
   Battery voltage	8 V or more
   Engine switch	On (IG)
   Starter	Off

P0713: Range check 

1. One of the following conditions is met: Condition (A) or (B)
   CONDITION (A)
   
   

   The monitor will run whenever the following DTCs are not present	P0115, P0117, P0118: ECT (Engine coolant temperature) sensor circuit P00AC, P00AD, P0110, P0112, P0113: IAT (Intake air temperature) sensor circuit
   Engine coolant temperature (ECT) or intake air temperature (IAT) at engine start	-29.375°C (-20.875°F) or less
   Time after engine start	479 seconds or more
   Engine switch	On (IG)
   Starter	Off
   ECT sensor circuit fail (P0115, P0117, P0118)	Not detected
   IAT sensor circuit fail (P00AC, P00AD, P0110, P0112, P0113)	Not detected

   CONDITION (B)
   
   

   The monitor will run whenever the following DTCs are not present	P0115, P0117, P0118: ECT (Engine coolant temperature) sensor circuit P00AC, P00AD, P0110, P0112, P0113: IAT (Intake air temperature) sensor circuit
   Engine coolant temperature (ECT) or intake air temperature (IAT) at engine start	Higher than -29.375°C (-20.875°F)
   Time after engine start	10 seconds or more
   Engine switch	On (IG)
   Starter	Off
   ECT sensor circuit fail (P0115, P0117, P0118)	Not detected
   IAT sensor circuit fail (P00AC, P00AD, P0110, P0112, P0113)	Not detected