Typical Enabling Conditions
P0715
| The monitor will run whenever the following DTCs are not present | None |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | OFF |
| Turbine speed sensor verify pulse input (P0717) | Not detected |
P0717
| The monitor will run whenever the following DTCs are not present | P0746, P0748 (Shift solenoid valve SL1 circuit) P0776, P0778 (Shift solenoid valve SL2 circuit) P0796, P0798 (Shift solenoid valve SL3 circuit) P2808, P2810 (Shift solenoid valve SL4 circuit) P2817, P2819 (Shift solenoid valve SL5 circuit) |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | OFF |
| ECM selected gear | 2nd, 3rd, 4th, 5th, 6th, 7th or 8th |
| Output shaft revolution | 1000 rpm or more |
| R position switch | OFF |
| Engine | Running |
| Transmission range switch circuit (P0705) | Not detected |
| Turbine speed sensor range check (P0715) | Not detected |