Freeze Frame Data [08/2019 - ]
- DESCRIPTION
- Whenever a lane control system DTC is stored, the forward recognition camera stores the current vehicle state as Freeze Frame Data.
- CHECK FREEZE FRAME DATA
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Chassis / Lane Control / Trouble Codes.
Chassis > Lane Control > Trouble Codes
- According to the display on the Techstream, select a DTC to display its freeze frame data.
Chassis > Lane Control
Tester Display Measurement Item Range Normal Condition Diagnostic Note Total Distance Traveled - - - Cannot be used Total Distance Traveled - Unit - - - Cannot be used LDA Control Lane control system control status Prohibit or Permit Prohibit: Control prohibited
Permit: Control permitted- Turn Switch (Right) Right turn signal switch status OFF or ON OFF: Right turn signal switch off
ON: Right turn signal switch on- Turn Switch (Left) Left turn signal switch status OFF or ON OFF: Left turn signal switch off
ON: Left turn signal switch on- Vehicle Information (2WD/4WD) - - - Cannot be used Vehicle Information (Conv/HV) - - - Cannot be used